To access to Clock and Language configuration page, you have to click on the "DateTime/Locale" entry in the main menu.
figure 1. Entry in the main menu
Clock configuration
When you need to troubleshoot or analyze issues, you cope with devices' clocks and server's clock: it is critical that PrivateServer's clock is properly set
Manual configuration
Manual clock configuration is possible from command line, accessing via SSH. Syntax for date command follows pattern MMDDhhmm[[CC]YY][.ss], eg to set clock at 2-nd of July 2012 4:35pm, you use:
# date 070216352012
NTP Synchronization
PrivateServer can be synchronized with an NTP server. It is possible to configure up to 2 NTP servers.
figure 2. insert the NTP servers address
After configuration you can immediately test if NTP server works properly
figure 3. test the NTP servers
Language Configuration
rfthery
aesfgseg