PSAM 3.2 Software Updates

In order to perform a software update you first need to check the actual status.

 

figure 1. PrivateServer version number

Click over the version number on the top-left side of the window (the one shown in figure 1. PrivateServer version number). This will trigger the internal update/upgrade system that will smoothly and totally automatically check for possible updates. 

figure 2. Software status(to be updated)

You get the "Appliance version" page showing both the package version and the available updates.

figure 3. Software status(up to date)

If the system is up to date, that it's shown as well instead of the update section.

In case you have updates to be installed just press on the "Update the system" button (the one shown in figure 2. Software status(to be updated)) and let it start the process.

figure 4. update in progress

The update process starts checking the action to perform.

figure 5. Update in progress, phase 2

Then it applies to the job (see above).

figure 6. Update completed

Once you're done, it tells you, as shown in figure 6. Update completed.

in caso di problemi .... ertyc etc

After you're done, just logout.