Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

How to Configure PGSM professional with dual SIM

Install PGSM from Market.

Open the phone settings → "SIM Card Manager" $text.replaceAll("]*>"," ").replaceAll("\s*\z","").

Check both SIM are active on device $text.replaceAll("]*>"," ").replaceAll("\s*\z","").

To decide which SIM to use to send self-reg SMS and register PGSM with the number desired → go to Data service network and choose SIM 2 for data connection (My case i will be using SIM 2 to self-reg to Privateserver) $text.replaceAll("]*>"," ").replaceAll("\s*\z","").

Open the phone settings → More networks  $text.replaceAll("]*>"," ").replaceAll("\s*\z","")  → Check under "Mobile Networks" that the mobile Network mode SIM 2 $text.replaceAll("]*>"," ").replaceAll("\s*\z","")  is set to LTE/WCDMA/GSM (auto connect) $text.replaceAll("]*>"," ").replaceAll("\s*\z","").  

To receive calls on both SIM check Receive incoming calls in General Tab

From drop down tap on SIM 2 to make it as the default connection for DATA and SMS $text.replaceAll("]*>"," ").replaceAll("\s*\z","").

Open PGSM and start step by step for the automatic activation Wizard.

Figure 1. SIM Card Manager
Figure 2. Both SIM are active on device
Figure 3. Data Service Network SIM 2
Figure 4. More Networks
Figure 5. Mobile Network Mode SIM 2



Figure 6. Network_Mode_LTE
Figure 7. Drop Down tap SIM 2



  • No labels