Child pages
  • PSAM 1.3 First Access

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3

Anchor
PSAM_1_3_first_access
PSAM_1_3_first_access
Once completed the PrivateServer installation, you can connect to the Web console to perform your preliminary setup.

PrivateServer configure its first NIC with the IP address 10.0.0.100 and subnet mask 255.255.255.0.
In order to configure the correct IP address of PrivateServer, you must connect your workstation (through cross-cable or network switch), to PrivateServer and configure the IP address of your workstation to 10.0.0.200/255.255.255.0. Then you will be able to reach the PrivateServer administrative interface trough the web address https://10.0.0.100.

Tip
If you can't directly connect to the device or you have no physical access to it (this mostly occur if you are installing on a virtual machine), then you can use your console to configure the network as stated in  PSAM 2.1 Network Configuration
Warning

If your server has multiple NIC, please make sure you connect to the correct server NIC (eth0 or the first NIC).

You'll get the login request as shown in fig.1:

Subtitle
PrefixFigure
SubtitleTextlogin page
AnchorNamelogin_page

To gain access use the default admin login: 


login: admin

At your first access you are asked to change your password:

Subtitle
PrefixFig
SubtitleTextchange password request form
AnchorName1st access change password

Info
titleNEW FEATURE

Since the present version any new user is asked to change his/hers password at the first valid access to the web interface

you'll be moved to the welcome page:

 

Subtitle
PrefixFigure
SubtitleTextWelcome Page
AnchorNamewelcome_page

 

Now you can edit the network configuration following the instructions in PSAM 2.1 Network Configuration.

Navbar