...
There are some few but still important differences between the
Xref | ||
---|---|---|
|
Xref | ||
---|---|---|
|
- Deny
- Permit
Deny
Deny represent the blacklist based on the IP address and the net mask we want to deny when associated to the current user. You have to write this in the form: <ipaddress>/<network mask>
Examples:
- 192.168.0.38/255.255.255.255 : Denies traffic from this IP address
- 0.0.0.0/0.0.0.0 : Denies every address
Permit
Permit is the exact opposite of the Deny option. It represent the whitelist based on the IP address and the net mask we want to have access. You have to write this in the form: <ipaddress>/<network mask>
Example:
- 192.168.0.38/255.255.255.0 : Allows traffic from this Network
Tip | ||
---|---|---|
| ||
You may have multiple rules for masking traffic. Combining together the Deny and the Permit option let you have a fine grain rule of access for any single user's account. Please keep in mind that the access rules are processed from the first to the last, meaning that the Deny will be used first and then will be analysed analyzed the Permit one. So: Deny: 0.0.0.0/0.0.0.0 Permit: 216.27.242.66/255.255.255.255 Deny every address except for the only one allowed. |
1.1.1.2.3 Actually create the Account
After you filled in the form (either the PGSM or the SNOM one), please click on the Create icon at the page's bottom.
Subtitle | ||||||
---|---|---|---|---|---|---|
| ||||||
...
Tip |
---|
An information line advice the operation just performed. |
You'll get back the Account List page List page and the table shows now your new user (
Xref | ||
---|---|---|
|
Note |
---|
Using this way makes the account enabled by default. |
To use the automatic activation even in the plain way go reading the 1.1.4 Automatic Activation.
1.1.1.3 Create a new account, the batch way
The "batch way" is an account creation mode designed specifically for large number of users to be created quickly.
Starting from Account List page
Xref | ||
---|---|---|
|
Subtitle | ||||||
---|---|---|---|---|---|---|
| ||||||
Prepare a .csv file with some account. The file must be formatted as the example below, keeping header names in the first row
Code Block | ||||
---|---|---|---|---|
| ||||
fullName,gsmNumber,email,securityModel,description Alessandro Bergamaschi,+391234567890,alessandro.bergamaschi@acme.com,end-to-site,Personal account Luigi Rossi,+3932456753,luigi.rossi@acme.com,end-to-site,Personal account Marco Bianchi,+39432242342,mbianchi@gmail.com,end-to-site,Personal account Mario Colombo,+394325346546,colombo.mario@acme.com,end-to-site,Personal account |
Select the default provisioning profile and a group for the newly account created. Upload the file and click create: you'll be leaded to the Group list page.
Once you've done you can choose whether to manually activate the user or to lean on the automatic activation.
Anchor | ||||
---|---|---|---|---|
|
...