...
| Warning |
|---|
The latest official firmware supported by PrivateWave is 8.7.3.19 |
a. Open the Web User Interface of the snom and navigate to the Software Update page.
...
| Step 1 | Step 2 |
|---|
Navigate to the Setup/Identity1 page, login tab: - Set Account, Authentication Username and password with the correct data data
that you have. - Set Registrar with the IP Address (or DNS) of Server Sip.
- Set Outbound Proxy in this form : ‘sips:ip_of_the_srv(or dns):5061’
| Goto in the Setup/Identity1 page, SIP tab: - Set Support Broken registrar to ON.
- DTMF via SIP Info set to ON.
|
 | |
| Step 3 | Step 4 |
|---|
Goto in the Setup/Identity1 page, RTP tab: - Set Codec: g722,pcmu,pcma,gsm,g726-32,aal2-g726-32,g723,g729,telephone-event
- Set RTP Encryption to ON.
- Set SRTP Auth-tag to AES-32.
- Set RTP/SAVP to Mandatory.
- Set Packet Size to 20ms.
- Set Media Transport Offer to UDP.
| Goto in the Certificates: - Enable the server identity check in TLS connection by pushing the "TLS"
button in "Unknown Certificates".
|
| |
...
| Step 3 | Step 4 |
|---|
| Insert the "*1*" string in the third column: These DTMF activate the transfer mode. | Act the same way for another dial button (i.e. P4) but this time insert the "*3*" DTMF train: this one activates the "3-way call" |
| |