The present manual offers a guide for installation and first time configuration of which along with composes the : the solution that ensures the safety and inviolability of voice communications on both mobile and landline fixed phones by offering a secure voice convergence system in a corporate network.
Requirements
works on VoIP technology (Voice over IP) and requires an internet access. Thus the server chosen for installation (either phisical or virtual) must have almost one Network Interface Card on board.
Goals
The present manual will explain to you how to:
- install from cdrom or by virtual machine
- configure the Network
- configure your certificates
- organize the network security architecture
- perform backup and restore
- perform software upgrades
Intended audience
This guide is intended for system administrators who will configure a secure enterprise voice network based on
. The reader should have a networking and system administration background. VoIP knowledge is not mandatory, but strongly suggested.
This manual won't explain how to manage the service itself (ie create users, groups, SIP trunk, etc). For such knowledge please refer to PrivateServer - Operator Manual.
Glossary
In the present documentation you'll meet the following terms:
PBX
A private branch exchange (PBX) is a telephone exchange that serves a particular business or office, as opposed to one that a common carrier or telephone company operates for many businesses or for the general public.
PBXs make connections among the internal telephones of a private organization—usually a business—and also connect them to the public switched telephone network (PSTN) via trunk lines.
Trunk
A trunk line is a circuit connecting telephone switchboards (or other switching equipment), as distinguished from local loop circuit which extends from telephone exchange switching equipment to individual telephones or information origination/termination equipment.
When dealing with a private branch exchange (PBX), trunk lines are the phone lines coming into the PBX from the telephone provider. This differentiates these incoming lines from extension lines that connect the PBX to (usually) individual phone sets.
Extensions
A telephone extension is an internal telephone line attached to a Private branch exchange (PBX). The PBX operates much as a community switchboard does for a geographic telephone numbering plan and allows multiple lines inside the office to connect without each phone requiring a separate outside line. In these systems, a dialer usually has to dial a number to tell the PBX to connect with a landline to dial an external number. Within the PBX, the user merely dials the extension number of the person. Each phone line may be extended up to a fixed maximum.
is the PBX committed to perform Secure Calls (using end to end end to site model). It differs from a standard PBX for exposing just the Secure Call service to VoIP clients and can be connected to a standard PBX via SIP Trunks if configured accordingly.
is the VoIP client for Secure Calls connections. It has to be used along with and is deployed in two different models to perform two different security models:
- Professional: used for end to end communications
- Enterprise: used for end to site communications
Because of the security model each one implements, the two versions can't communicate with each other. Plus, the Professional edition can only perform direct calls to another Professional Devices. On the other hand the Enterprise Edition can also perform Conference Calls and Three-Way Calls.
Conference Rooms
The Conference Room is the kind of call that more persons can partecipate. The conference calls are usually defined as "rooms", whose access can be limited by time settings or pass code.
Warning |
---|
Conference rooms can be accessed only by using Enterprise Edition. |
Conference Calls
Conference Call, as its name implies, is a call involving at least three users. It differs from Conference Room by the fact that Conference Call is one Secure Call at which third parties got invited. So it's one sort of dynamic conference room. All users invited are thus added to conversation in progress by either caller or callee.
Warning |
---|
Conference Calls can be accessed only by Enterprise Edition. |
Call transfer
Call transfer is a typical PBX performance which is implemented in as well, but only if the users are running a Enterprise Edition. One of the partecipant can hold on his/hers peer and perform a new call to the number to which trasfer the call. If the desired number picks up the call, then the transferrer can close the communication and let his/hers peer talk with the trasferred number.
Jitter
In VoIP systems audio signal is split into multiple packets, which are sent over network. Due to network equipment behavior, packets flow is never regular and constant. Especially on mobile/radio networks packets are delivered in bursts, leading to irregular and variable latency. Jitter is the variation in latency as measured in the variability over time of the packet latency across a network.
Automatic Activation
The Automatic Activation is the way of create new users automatically without any need they interact with anybody. As from user's side the procedure is that he/she gets first an invite SMS or E-Mail useful to download the application
and then a configuration SMS or E-Mail which provides automatic configuration of the client itself. All the user has to do is to follow the links into both the Texts/E-mails and would go automatically on line.Provisioning
The Provisioning is the configuration needed for delivering both for the
application and its configuration and nowadays it's used by the Automatic Activation only. Presence
The Presence is how we call the user's status, also known as the user's reachability. By checking an user's Presence it is possible to know if a he/she is on line and can receive a secure call before trying to.
Audio Messaging
The Audio Messaging is the means used by
for communicating to an user about the failed calls. You have several messages that can be spoken and each of them can be localised in English, French, Italian, Spanish and German.Secure Message
Secure Message is a text message that can be sent and received only by using and that shares the same communication infrastructure of Secure Call. The maximum length of each message is 160 character.
Call Roaming
Call Roaming is specific configuration set up by default on both
and Enterprise. It let any call to continue even if one network change event occur (e.g: wi-fi network got lost in favour of 3g data mobile one). During network change itself the call is muted but as soon as any connection is again available, then voice stream is back streaming. Call roaming is subject to Strictrtp and Rtp timeout options in . Caveat
The figures in this document are solely for illustrative purposes. They give you an idea about the essential information you are supposed to see on the screen while executing the test cases. However the layout of the screen and the details of the information may be changed in subsequent revisions of the software and these modifications are not obligatory reflected in this document. When considering whether a test case passed or not, you should relay only on the textual description of the test case.
...