...
| Tip |
|---|
| If you can't directly connect to the device or you have no physical access to it (this mostly occur if you are installing on a virtual machine), then you can use your console to configure the network as stated in PSAM 2.1 Network Configuration |
| Warning |
|---|
If your server has multiple NIC, please make sure you connect to the correct server NIC (eth0 or the first NIC). |
You'll get the login request as shown in fig.1:
| Subtitle | ||||||
|---|---|---|---|---|---|---|
| ||||||
To gain access use the default admin login:
...
At your first access you are asked to change your password:
| Subtitle | ||||||
|---|---|---|---|---|---|---|
| ||||||
you'll be moved to the welcome page:
| Subtitle | ||||||
|---|---|---|---|---|---|---|
| ||||||
...
Now you can edit the network configuration following the instructions in PSAM 2.1 Network Configuration.
Navbar