As the CUCMBE is prone to a wide range of configurations and network VoIP setup, we will explain to you the basic configuration and let the CUCMBE managers work out how to integrate it in their own environment. It's out of the scope of the present documentation to teach you how to manage a CUCMBE.
Of course you need the CUCMBE appliance, which may come both in VMWare virtualization fashion or in real steel installed one. In either cases we assume that:
basic services are activated (see the fig. X). Beware the "Cisco IP Voice Media Streaming App" which must be activated in order to create an MTP (Media Termination Point)
- The phones (both SCCP or SIP ones) are correctly configured and functioning
- Your network design let the UDP packets to stream from the PrivateServer to the CUCMBE and vice versa
1.2 Basic CUCMBE configuration
If the prerequisites are matched then we first need to configure a new SIP Trunk. Go to the Cisco Unified CM Administration and from its GUI use the the Device->Trunk menu entry to create a new one.