Page History

...

• From the

  Xref
  AnchorName siptls_conf

  you can set up the cipher list of the

  Brand
  brand server

  . This is the list list of accepted cipher suite, using OpenSSL format. Check at http://www.openssl.org/docs/apps/ciphers.html#CIPHER_LIST_FORMAT. Usually you can leave the default values.
• From SIP/TLS it's is possible to set up the cipher list for https HTTPS protocol.

2.4.2 RTP

"The Real-time Transport Protocol (RTP) defines a standardized packet format for delivering audio and video over IP networks" (quote from Wikipedia). 

...

Strictrtp if enabled, RTP packets that do not come from the source of the RTP stream will be dropped.

Rtp timeout

Rtp timeout sets up the amount of seconds one server can wait without dealing RTP packages on one call's leg. This value is connected to client's setup and it gives you the fault tolerance time of one call. 

2.4.3 Jitter Buffer

Jitter is Jitter is the variation in latency as measured in the variability over time of the packet latency across a network. The consequences of jitter, often called jittering, are a voice communication with gaps in it or stirring metal voice effect. Mostly on a GPRS and EDGE network (and in general in a mobile network environment), the jitter is a sensible problem to face. To cope with jittering issues,  a jitter buffer produces a smooth and regular audio output, just adding some more latency.

...

Subtitle
Prefix figure SubtitleText Jitter Buffer configuration form AnchorName edit jitter buffer

The jitter buffer is an elastic is an elastic buffer in which the signal is temporarily stored and then retransmitted re-transmitted at a rate based on the average rate of the incoming signal. Checking the Enable checkbox you allow

The Force option obliges

MaxSize is the max length of the jitterbuffer in milliseconds. 

...