Page History

In the present documentation you'll meet the following terms:

 

PBX

 

A private branch exchange (PBX) is a telephone exchange that serves a particular business or office, as opposed to one that a common carrier or telephone company operates for many businesses or for the general public. 

 

PBXs make connections among the internal telephones of a private organization—usually a business—and also connect them to the public switched telephone network (PSTN) via trunk lines.

...

Trunk

 

A trunk line is a circuit connecting telephone switchboards (or other switching equipment), as distinguished from local loop circuit which extends from telephone exchange switching equipment to individual telephones or information origination/termination equipment.

 

When dealing with a private branch exchange (PBX), trunk lines are the phone lines coming into the PBX from the telephone provider. This differentiates these incoming lines from extension lines that connect the PBX to (usually) individual phone sets. 

 

Extensions 

A telephone extension is an internal telephone line attached to a Private branch exchange (PBX). The PBX operates much as a community switchboard does for a geographic telephone numbering plan and allows multiple lines inside the office to connect without each phone requiring a separate outside line. In these systems, a dialer usually has to dial a number to tell the PBX to connect with a landline to dial an external number. Within the PBX, the user merely dials the extension number of the person. Each phone line may be extended up to a fixed maximum.  

Secure Call

 

A Secure Call is a voice connection which can't be wiretapped and it runs over Voice Over IP (VoIP) communication protocol.

 

 

 

 

 

 

Brand
brand server

 

Brand
brand server

 is the PBX committed to perform Secure Calls both end to end and end to site. It differs from a standard PBX for exposing just the Secure Call service to VoIP 

Brand
brand client

 clients and can be connected to a standard PBX via SIP Trunks if configured accordingly.

 

Brand
brand client

 

Brand
brand client

 is the VoIP client for Secure Calls connections. It has to be used along with 

Brand
brand server

.

 

 

 

Conference Rooms

 

The Conference Room is the kind of call that more persons can partecipate. The conference calls are usually defined as "rooms", whose access can be limited by time settings or pass code.

 

...

...

.

 

Conference Calls

 

Conference Call, as its name implies, is a call involving at least three users. It differs from Conference Room by the fact that Conference Call is one Secure Call at which third parties got invited. So it's one sort of dynamic conference room. All users invited are thus added to conversation in progress by either caller or callee.

 

Warning
Conference Calls can be accessed only by  Brand brand client Enterprise Edition.

 

Call transfer

 

Call transfer is a typical PBX performance which is implemented in 

Brand
brand server

 as well, but only if the users are running a 

Brand
brand client

 Enterprise Edition. One of the partecipant can hold on his/hers peer and perform a new call to the number to which trasfer the call. If the desired number picks up the call, then the transferrer can close the communication and let his/hers peer talk with the trasferred number.

 

Jitter 

In VoIP systems audio signal is split into multiple packets, which are sent over network. Due to network equipment behavior, packets flow is never regular and constant. Especially on mobile/radio networks packets are delivered in bursts, leading to irregular and variable latency. Jitter is the variation in latency as measured in the variability over time of the packet latency across a network. 

...

The Automatic Activation is the way of create new users automatically without any need they interact with anybody. As from user's side the procedure is that he/she gets first an invite SMS or E-Mail useful to download the application 

Brand
brand client

 and then a configuration SMS or E-Mail which provides automatic configuration of the client itself. All the user has to do is to follow the links into both the Texts/E-mails and 

Brand
brand client

 would go automatically on line.

Provisioning

 The Provisioning is the configuration needed for delivering both for the 

Brand
brand client

 application and its configuration and nowadays it's used by the Automatic Activation only. 

Presence

The Presence is how we call the user's status, also known as the user's reachability. By checking an user's Presence it is possible to know if a he/she is on line and can receive a secure call before trying to.

...