Page History

...

Subtitle
Prefix figure SubtitleText Cipher list configuration form AnchorName siptls_conf
Image Modified

 

From the

Xref
AnchorName siptls_conf

you can set up the  cypher list of the

Brand
brand server

. This is the list of accepted cipher suite, using OpenSSL format. Check at http://www.openssl.org/docs/apps/ciphers.html#CIPHER_LIST_FORMAT. Usually you can leave the default values.

...

Subtitle
Prefix figure SubtitleText Jitter Buffer configuration form AnchorName edit jitter buffer
Image Modified

The jitter buffer is an elastic buffer in which the signal is temporarily stored and then retransmitted at a rate based on the average rate of the incoming signal. Checking the Enable checkbox you allow

Brand
brand server

to perform such jitter buffering in general, when needed.

...

Subtitle
Prefix figure SubtitleText The Management console asks to restart the service AnchorName restart service
Image Modified

To apply your changes just press the Update button and the management interface will ask you to restart the asterisk service in order to apply your new configuration, as shown in 

...

Subtitle
Prefix figure SubtitleText Edit the obfuscation parameters AnchorName edit_obfuscation
Image Modified

The configuration is quite simple. Mode enables/disables the obfuscation mode.

...

Subtitle
Prefix figure SubtitleText NAT configuration form AnchorName nat_config
Image Modified

Apart from your router/firewall configuration (please check <ac:macro ac:name=) and your network design/topology, from

Brand
brand server

point of view the only known thing is that the appliance is configured on a private IP address but the requests of the encrypted voice service are made to an external and public IP address. To avoid wrong replies the

Brand
brand server

must know of this setup and be configured accordingly. Thus if you fall in the described scenario access to the "NAT Configuration" form (showed in 

Xref
AnchorName nat_config

) using the "NAT" link under "Server Configuration".

...